Technical Specifications of the Sampo 10 Combine Harvester:
Sampo 10 Combine Harvester was produced from 1965 to 1969. It was equipped with a Perkins 4.107 engine with a capacity of 1760 cm³ and a power of 43 HP. The engine has four cylinders. The harvester has a mechanical gearbox with three gears, allowing it to travel at speeds from 1.1 to 17 km/h. The cutting unit has a working width of 213 cm, and inside the harvester, there are three straw walkers. The dimensions of the harvester are 725 cm in length, 255 cm in width, and 260 cm in height without the cabin. The weight without the cabin is 2750 kg. The grain tank has a capacity of 12 hectoliters. The size of the front wheels is 14.9-24, and the rear wheels are 8.50-12. The fuel tank capacity is 90 liters.
Advertisement
Data sheet for Sampo 30, 10, 20 combine harvesters:
| Model | Sampo 10 | Sampo 20 | Sampo 30 |
| Years of production | 1965-69 | 1968-71 | 1968-71 |
| Engine manufacturer | Perkins | Valmet | Valmet |
| Engine model / type | 4.107 | 310 BL | 310 BL |
| Engine displacement (cm3) | 1760 | 2685 | 2685 |
| Number of cylinders / turbocharging | 4 | 3 | 3 |
| Engine rated power (hp) | 43 | 54 | 54 |
| Fuel tank capacity (l) | 90 | 90 | 90 |
| Type of drive transmission | mech | mech | mech |
| Number of gears (front + rear) | 3 | 3 | 3 |
| Driving speed min-max (km/h) | 1,1-17 | 1,1-17 | 1,1-17 |
Advertisement
| Cutting unit working width (cm) | 213 | 213 | 244 |
| Number of straw walkers | 3 | 3 | 3 |
| Total length (cm) | 725 | 720 | 770 |
| Total width (cm) | 255 | 255 | 285 |
| Width without cutting attachment (cm) | – | – | – |
| Height without cabin (cm) | 260 | 261 | 278 |
| Total height with cabin (cm) | – | – | – |
| Weight without cabin (kg) | 2750 | 2920 | 2965 |
| Weight with cabin (kg) | – | – | – |
| Grain tank capacity (hl) | 12 | 12 | 15 |
| Front wheel size | 14,9-24 | 14,9-24 | 14,9-24 |
| Rear wheel size | 8,50-12 | 8,50-12 | 8,50-12 |
Advertisement
Add an opinion about Sampo 10/20/30:
Sampo 10, 20, 30 Gallery:
Advertisement
