Technical specifications of Sampo 2065 HT Combine Harvester:
Sampo 2065 HT Combine Harvester is equipped with an AgcoPower 44 CTA engine with a capacity of 4400 cm³ and 130 HP. The engine has four cylinders with turbocharging and an intercooler. The combine harvester has a hydrostatic gearbox with three gears, allowing speeds from 0 to 25 km/h. The cutting unit has a working width of 390 cm, and there are five straw walkers inside the combine. Its dimensions are 868 cm in length, 430 cm in width, and 350/365 cm in height with the cab. The width without the cutting header is 304 cm, and the weight with the cab is 7895 kg. The grain tank has a capacity of 37 hectoliters. The front wheels measure 520/70R34, and the rear wheels are 360/70R20. The fuel tank capacity is 350 liters.
Advertisement
Data sheet for Sampo 2095, 2065 HT combine harvesters:
| Model | Sampo 2065 HT | Sampo 2095 |
|---|---|---|
| Years of production | – | – |
| Engine manufacturer | AgcoPower | AgcoPower |
| Engine designation/type | 44 CTA | 66 CTA |
| Engine displacement (cm³) | 4400 | 6600 |
| Number of cylinders / turbocharging | 4 TI | 6 TI |
| Rated engine power (HP) | 130 | 210 |
| Fuel tank capacity (L) | 350 | 350 |
| Type of transmission system | hydr | hydr |
| Number of gearbox speeds | 3 | 3 |
| Minimum-maximum driving speed (km/h) | 0-25 | 0-25 |
Advertisement
| Cutting unit/header working width (cm) | 390 | 450 |
|---|---|---|
| Number of straw walkers | 5 | 5 |
| Total length (cm) | 868 | 910 |
| Total width (cm) | 430 | 490 |
| Width without cutting unit/header (cm) | 304 | 330 |
| Height without cab (cm) | – | – |
| Total height with cab (cm) | 350/365 | 365 |
| Weight without cab (kg) | – | – |
| Weight with cab (kg) | 7895 | 8900 |
| Grain tank capacity (hl) | 37 | 52 |
| Front wheel size | 520/70R34 | 750/65R26 |
| Rear wheel size | 360/70R20 | 420/65R20 |
Advertisement
Add your opinion and share the fuel consumption of the combine Sampo 2065 HT, 2095:
Sampo 2065 HT, 2095 Gallery:
Advertisement